Description

Up 6O is a discreet 6” ceiling speaker delivering consistent coverage and crisp, clear sound to a wide range of cost conscious, commercial environments from hotels and concourses to retail outlets, bars and restaurants.

Up 6O is supplied without a back can for ceilings with a minimum cavity depth, while an integral fixing system is included to achieve a simple and clean installation. The steel perforated grille is finished in neutral white.

Up 6O features a 6” (162mm) low frequency driver paired with a 0.7” (20mm) metal dome tweeter. It is suitable for both high quality speech and music reproduction. A conical 110° coverage pattern delivers consistent, high performance sound where it needs to go. 

 

Each Up 6O can be run on a series of 70 or 100 Volt taps or at low impedance. The 16 ohm setting allows up to four units to be connected to each amplifier channel at low impedance. Tap selection is via a rotary switch behind the removable grille.

SmartAmp or powered Zone will provide amplification, optimal sound performance and loudspeaker protection via onboard presets. When teamed with Zone and WebApp, system set up and end user control is effortless, and can be further supplemented by ZonePad wall controllers.

 

Features

  • 6” Coaxial Driver
  • Discreet size without back can
  • Unobtrusive Design
  • 16 ohm or 70/100V line operation
  • Wide Conical Coverage Pattern
  • Integrated Mounting Hardware

 

Specifications

TYPE Two-way, full range, passive, ceiling speaker
FREQUENCY RESPONSE (with preset)

65Hz to 18kHz ±3dB
-10dB @ 50Hz

DRIVERS

LF: 6.5” (162mm), Coated paper

HF: 1” (25mm) exit/ 0.7” (20mm) Metal dome

RATED POWER 60W (AES) 120W (Peak)
NOMINAL IMPEDANCE 16Ω
SENSITIVITY (1W/1m) 90dB
MAXIMUM SPL 108dB (cont), 111dB (peak)
CROSSOVER 2.7kHz passive
RECOMMENDED HIGH-PASS FILTER 24dB/octave @ 60Hz
TRANSFORMER TAPS @ 70V 60, 30, 15, 7.5W
TRANSFORMER TAPS @ 100V 60, 30, 15W
DISPERSION (-6dB) 110? conical
BACK CAN N/A
BAFFLE ABS
PROTECTIVE GRILLE Perforated steel
FIRE RATING UL94-V0
CONNECTORS 4 Pin Euroblock with link out
FITTINGS C-ring support backing plate

DIMENSIONS (inc. Grille)

(Ø) 251mm x (D)103.5mm

(Ø) 9.88” x (D) 4.1”

CUT-OUT DIAMETER

222mm (8.74”)

WEIGHT

2.24kg (4.94lb)

 

 

Additional information
Brand

Optimal Audio

Color

White

Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.